Duplex Stainless Steel Gate Valves

The purpose of Duplex stainless steel Gate valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. These DSS gate valves generally are either fully open or fully closed in service pipe line.The selection of a duplex gate valve manufactured by us may not only solve the corrosion problem but also contribute to the cost effectiveness of the product because of its high strength.

Duplex Stainless Steel Gate Valves

contact information of Duplex Stainless Steel Gate Valves manufacturers in India

 

Duplex stainless steel Casted Gate Valves Grade Options


Select best quality duplex steel casted gate valves from a wide range of grades to best suit your applications

  • A8901A/A995 3A CD4MCu Duplex Stainless Steel Check valves
  • A890/A995 1B CD4MCuN Duplex Stainless Steel Check valves
  • A890/A995 2A CE8MN Duplex Stainless Steel Check valves
  • A890/A995 4A CD3MN Duplex Stainless Steel Check valves

 

 

Duplex stainless steel Forged Gate Valves Grade Options


Select best quality duplex steel casted gate valves from a wide range of grades to best suit your applications

  • ASTM A182 F51 Duplex Stainless Steel Double Block and Bleed Valves
  • ASTM A182 F53Duplex Stainless Steel Double Block and Bleed Valves

 

 
Types of Duplex Stainless Steel Casted Gate Valves

Duplex Stainless Steel Gate Valve

Type : API Cryogenic

 

 

Duplex Stainless Steel Gate Valve

Type: API Flanged

 

Duplex Stainless Steel Gate Valve

Type : API Jacket Flanged

 

Types of Duplex Stainless Steel Forged Gate Valves

Duplex Stainless Steel Forged Gate Valve

Type : Butt Weld

 

Duplex Stainless Steel Forged Gate Valve

Type : API Jacket Flanged

 

Types of Duplex Stainless Steel Pressure Sealing Gate Valves

Duplex Stainless Steel Pressure Sealing Gate Valve

 

Type : API Butt-weld

 

Duplex Stainless Steel Pressure Sealing Gate Valve

 

Type : API Flanged

 

Duplex steel Gate valves can be classified in two types of gate valves:

Duplex Stainless Steel Rising Stem Gate valves

The stem will rise above the hand wheel if the valve is opened in the Rising Stem type duplex steel valves. This happens because the stem is threaded and mated with the bushing threads of a Yoke. A Yoke is an integral part from a Rising Stem valve and is mounted to the Bonnet.

 

Duplex Steel Non Rising Stem Gate valves

There is no upward stem movement if the valve is opened in the non Rising Stem type duplex steel gate valves. The stem is threaded into the disk itself. The disk travels up or down the stem on the threads while the stem remains vertically stationary when the hand wheel on the stem is rotated in this type of valve,

The disk of a duplex steel Gate valve is completely removed when the valve is fully open; the disk is fully drawn up direction in to the valve Bonnet. This mechanism leaves an opening for flow through the valve at the same inside diameter as the pipes line at the point where these valves are installed. Our quality duplex steel gate valve can be used for a wide range of liquids and provides a tight seal when closed.

Duplex stainless steel Gate valves have three main body parts: body itself , bonnet, and trim. The body is the main carrier usually connected to other equipment or service pipe line by means of various end connection options like flanged, screwed or welded end connections. The bonnet, which containing the moving parts, is generally attached to the body with bolts to permit maintenance operations easily.

The valve trim component consists of the stem, the gate, the disc or wedge and the seat rings. We are manufacturing and supplying these quality duplex steel Gate valves with different disks or wedges. Ranging of the Gate valves is usually made by the type of wedge used.The most common disks of a gate valve manufactured by us are Solid wedge, Flexible wedge(one-piece disc) and Split wedge disks. Duplex steel valves stem is responsible for the proper positioning of the disk which connects the hand wheel and disk with each other of these duplex steel valves. These stems are usually we manufacture with forging process and connect to the disk by threading on it or other best mechanism techniques as per technical standards and specifications to prevent leakage i.e. 100 percent leakage free in the area of the seal. We make sure that the surface finish of the stem is fine for smooth operating of these duplex steel gate valves.

Duplex Stainless Steel Gate valves contain only about half the nickel concentration of typical austenitic stainless steels, they are therefore less expensive and less sensitive to the price of nickel Duplex Stainless Steel Gate valves are very high Mechanical Strength Duplex Stainless Steel Gate valves are high resistance to pitting and crevice corrosion Duplex Stainless Steel Gate valves Good Resistance to stress corrosion cracking in a chloride environment Duplex Stainless Steel Gate valves very good resistance to uniform corrosion Duplex Stainless Steel Gate valves are high resistance to stress corrosion and corrosion resistance
Duplex Stainless Steel Gate valves good resistance to the corrosion cracking. Duplex Stainless Steel Gate valves good fatigue resistance Duplex Stainless Steel Gate valves low thermal expansion and higher heat conductivity than austenitic steels Duplex Stainless Steel Gate valves high energy absorption

Although the duplex steels Gate valves have good oxidation resistance due to their high chromium contents, they suffer from embrittlement if exposed to temperatures above about 350°C, so they are restricted to applications below this. Duplex steel Gate valves Advantages and disadvantages are important to be considered

Advantages of DSS Gate valves from the design point of view are as following

Good shutoff features in the gate valves
Pressure loss through the valve is minimum.
Duplex stainless steels gate valves have good weldability.
Gate valves are bidirectional and therefore they can be used in two directions

DSS Gate valves Disadvantages from the design point of view are as following

Gate Valves can not be quickly opened or closed
DSS Gate valves are not suitable for regulate or throttle flow
Gate Valves are sensitive to vibration in the open state


Applications of DSS gate valves is across all manufacturing and processing industries.
Duplex Steel  Gate valves for Oil & Gas Industries
Oil & Gas
Industries
Duplex Steel Gate valves for nuclear industries
Nuclear Power
Projects
Duplex Steel Gate valves for  Nuclear Power  projects
Petroleum Refineries
Duplex Steel  Gate valves for Hydro Power  projects
Hydro Power
Projects
Duplex Steel Gate valves for Offshore Industries
Chemical
Industries
Duplex Steel Gate valves for Pharmaceutical Industries
Pharmaceutical
Industries
Duplex Steel Gate valves for Pipe Lines
Offshore Industries
Duplex Steel Gate valves for Marine Industries
Process Industries
Duplex Steel  Gate valves for Process Industries
Pipe Line Projects
 
Marine
Industries


Select the best suitable gate valves from a wide range of gate valves manufactured and supplied around globe with strict quality norms.

 

Countries where Neev Valves can supply Duplex Steel Gate Valves

 

Neev Valves Welcomes Distributors for Duplex Steel Gate Valves

contact information of Duplex Stainless Steel Gate Valves manufacturers in India